- Automatic control
- Stone option comes with cover plate and side panelling inlay in stone
- ORANIER safe-locking-system
- Heat accumulation stone W+, approx. 40 kg
- Solid cast iron base
- Air-flow handle
- Standard external combustion air connection
The connecting piece for external combustion air supply is not included in the scope of delivery.
|Energy efficiency class||A+|
|Connection possibility||top / rear|
|Operation with external air supply||rear / bottom|
|Nominal heat output||7,0 kW|
|Height||1525 (Steel), 1575 (Stone) mm|
|Weight (incl. packaging) steel||262 kg|
|Weight (incl. packaging) stone||306 kg|
|Weight of storage block W +||40 kg|
|Room heating capacity up to||144 m³|
|Length of logs||33 cm|
|Exhaust gas mass flow||6,1 g/s|
|Exhaust temperature||310 °C|
|Required delivery pressure||0,12 mbar|
Accessories for your Wood stove Corso W+
|Steel black||4897 11|
|Soapstone, corpus steel grey||4897 22|
|Soapstone, corpus steel black||4897 23|
|Limestone cream, corpus steel black||4897 87|
In modern, more dense buildings with controlled ventilation systems, the combustion air must be supplied from the outside so there can not arise a vacuum in the living room. This requires a separate external air supply.
The simultaneous operation of a stove with solid fuels and controlled ventilations systems is only permittet, if the stove has an approval under building law as independent of ambient air stove according to DBIT. The stove has to be equiped with a security device e.g. low pressure warning device that has acces to the ventilation systems and is able to turn them off in case a vacuum arises.
Please find more information about DBIT in the users manual.