Wood stove Polar Neo Aqua with boiler function

Delivery info

  • Automatic primary air control
  • ORANIER safe-locking-system
  • Height-adjustable feet
  • Profiled vermiculite firebox lining with „Max. Load“ information
  • Standard external combustion air connection
  • Solid cast iron door / cast iron base
  • Extra large ash tray
  • Stone / ceramic cover plate combination with heat accumulation
    stone compartment
  • Thermal discharge safety device (TAS)

The wood stove Polar Neo Aqua with boiler function and safety-locking-system is approved for independent of ambient air operation.

The connecting piece for external combustion air supply is not included in the scope of delivery.

Technical details

Energy efficiency class A+
Connection possibility top
Operation with external air supply rear / bottom
Nominal heat output 10 kW
Water-side performance 6,0 kW
Height 1320 mm
Width 595 mm
Depth 505 mm
Weight (incl. packaging) steel 203 kg
Weight (incl. packaging) stone 273 kg
Weight (incl. packaging) tile 273 kg
Room heating capacity up to 200 m³
Efficiency >83 %
Length of logs 35 cm
Exhaust gas mass flow 8,1 g/s
Exhaust temperature 227 °C
Required delivery pressure 0,12 mbar


7615_PolarNeoAqua_User manual
PDF 3.89 MB
7615_PolarNeoAqua_CE marking
pdf 281.12 KB
7615_PolarNeoAqua_EU data sheet
PDF 62.55 KB
7615_PolarNeoAqua_Declaration of performance
PDF 316.11 KB
7615_PolarNeoAqua_Energy label
PDF 877.60 KB

Order numbers

Steel grey 7615 29
Steel black 7615 11
Ceramic Pepper red, corpus steel grey 7615 82
Ceramic Pepper red, corpus steel black 7615 86
Ceramic Silk white, corpus steel grey 7615 81
Ceramic Silk white, corpus steel black 7615 85
Ceramic Grappa, corpus steel grey 7615 83
Ceramic Grappa, corpus steel black 7615 87
Ceramic Namib, corpus steel grey 7615 80
Ceramic Namib, corpus steel black 7615 84
Soapstone, corpus steel grey 7615 22
Soapstone, corpus steel black 7615 52
Sandstone, corpus steel grey 7615 32
Sandstone, corpus steel black 7615 42

Product highlights

BImSchV – Guaranteed clean!

All Oranier fireplaces and tiled stoves already represent the 2nd stage of the BImSchV, which came into force on 22.03.2010.

Profiled burning chamber lining

The furnace lining has profiled vermiculite components with high strength and attractive surface. It looks nice and provides the required turbulence of the gases for clean combustion.

24 h continuous operation

A special feature of quality and enviromental friendliness. 

The Oven can be used temporary unlimited. Use only permissible fuels. Check the manual! 

External combustion air supply

In modern, more dense buildings with controlled ventilation systems, the combustion air must be supplied from the outside so there can not arise a vacuum in the living room. This requires a separate external air supply.

Please notice:
The simultaneous operation of a stove with solid fuels and controlled ventilations systems is only permittet, if the stove has an approval under building law as independent of ambient air stove according to DBIT. The stove has to be equiped with a security device e.g. low pressure warning device that has acces to the ventilation systems and is able to turn them off in case a vacuum arises. 

Please find more information about DBIT in the users manual.

Airwash system

A deliberately conducted airflow prevents condensation and deposition of flue gases at the inside of the glass. This keeps the window clear.


The special ORANIER triple-air-system provides for the ideally dosed air supply exactly where its needed for the combustion. The desired result is an especially clean and efficient combustion.


Water heat exchanger in stoves offer the option to supply a portion of the thermal power produced into the central heating system. As a result a saving in oil and gas and a reduction of CO2 emissions occures.

Air-flow handle

By air circulation through the ergonomically shaped handle the temperature at the surface is largely reduced.